Our Products

Product Details

Smart Control Valve Testing is now easier than ever
 
The Fluke 710 Valve Testing Loop Calibrator is designed to enable users to perform quick, easy tests on HART smart control valves. Featuring built-in test procedures and an intuitive user interface, the 710 allows users to quickly and easily perform valve tests, while the valve test quick-check results provide at-a-glance diagnostics help you make maintenance decisions faster than ever. The valve health quick-check results let you know whether your valve is in good, marginal or in bad operating condition so you can quickly decide whether additional maintenance is necessary.
 
Valve testing and HART communication in a precision loop calibrator
 
With the 710 Valve Testing Loop Calibrator’s built in HART communication function, users can source a 4-20 mA signal to cause the smart control valve to move, while simultaneously interpreting the valve’s HART feedback signal to determine whether the valve is moving to the expected position. In addition to positional information, the measured pressure delivered from the valve’s internal I/P (which moves the valve) can be determined through the HART communication protocol.
 
The 710 has built-in test procedures that automatically increase and change the mA signal while monitoring the HART position and pressure feedback from the control valve, giving you a better overall picture of valve health at the simple push of a button.
 
Key features
 
  1. Key valve testing functions include pre-configured valve signature test, speed test, step test, manual test, and bump/partial stroke test
  • Key mA loop calibrator functions include mA source, mA simulate, mA read, mA read/loop power, and volts read
  • ValveTrack™ Software enables upload to a PC for further in-depth analysis of valve measurements that are logged and recorded to memory

Details Specifications:

Functions mA source, mA simulate, mA read, mA read/loop power, and volts read.
Ranges mA (0 to 24 mA) and Volts (0 to 30 V DC)
Resolution 1 µA on mA ranges and 1 mV on voltage range
Accuracy 0.01% ± 2 counts, all ranges (@ 23 °C ± 5 °C [73.4 °F ± 41 °F])
Operating temperature range -10°C to 55°C (14°F to 131°F)
Humidity range 10 to 95% non-condensing
Stability 20 ppm of F.S. /°C from -10°C to 18°C and 28°C to 55°C
Display 128 x 64 pixels, LCD Graphic w/backlight, .34 high digits
Power 6 AAA alkaline
Battery life 40 hours continuous use (measure mode using)
Loop compliance voltage 24 V DC @ 20mA
Over-voltage protection 240 V AC
Overload current protection 28 mA DC
EMC EN61326 Annex A (Portable Instruments)
Dimensions (L x W x D) 15 x 9 x 3 cm (6 x 3.6 x 1.3 in)
Weight 0.3 kg (9.5 oz)
Included accessories Traceable calibration certificate with data, batteries, test leads, USB upload cable and safety
Warranty Three year

 

Models: 710 mA Loop Valve Tester
 
Fluke-710 mA Loop Valve TesterValve Testing Loop Calibrator with HART
 
Includes:
 
  • Stackable test lead set
  • Extended tooth alligator clip set
  • TP220 test probes
  • AC280 SureGrip™ hook clips
  • Lemo to USB upload/download cable
  • ValveTrack™ software (free download)
  • Softcase
  • Six AAA batteries (installed)
  • 709/709H/710 Product manual CD-ROM
  • 709/709H/710 Quick reference guide
  • 709/709H/710 Safety information