Product overview: Fluke 1630-2 FC Earth Ground Clamp
The 1630-2 FC clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw. This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult inside buildings, on power pylons or anywhere you dont have access to soil to place auxiliary test stakes.
Earth ground ac leakage current measurement
Identify ac leakage currents without disconnecting the earth ground stake from the grounding system–ideal for system troubleshooting.
Rugged heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.
Key features
The Fluke 1630 is a MUST HAVE for those who are intent on improving the reliability of their systems and making it impervious to impulse damage. The Fluke 1630 is easy to use, highly accurate and an industry standard- verified purchaser
Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement Saves up to 32,760 measurements in memory
Specifications: Fluke 1630-2 FC Earth
Ground Clamp |
|
|
Electrical Specifications |
|
|
Maximum voltage to earth ground |
1000 V |
|
Battery type |
AA alkaline IEC/EN LR6 (x4) |
|
Battery life |
More than 15 hours |
|
|
|
|
Frequency range |
40 Hz to 1 kHz |
|
Ingress protection |
IEC/EN 60529: IP30 with jaw closed |
|
LCD |
Digital reading |
9999 counts |
|
Refresh rate |
4 per second |
Operating temperature |
-10 °C to + 50 °C |
|
Storage temperature |
-20 °C to + 60 °C |
|
Operating humidity |
Non condensing (<10 °C) (< 50
°F) |
|
Operating altitude |
2000 m (6561 feet) |
|
Storage altitude |
12 000 m (39,370 feet) |
|
Reference temperature |
23 °C ±5 °C (73 °F ±9 °F) |
|
Temperature coefficient |
0.15% x (specified accuracy)/ °C
(<18 °C or >28 °C [<64.4 °F or >82.4 °F]) |
|
Overload indication |
OL |
|
Data logging capacity |
Minimum of 32,760 measurements |
|
Data logging interval |
1 second to 59 minutes and 59 seconds |
|
|
Models: Fluke 1630-2 FC Earth Ground Clamp
Fluke 1630-2 FC
Includes:
1630-2 FC Earth Ground Clamp
Hard case
Loop resistance standard
4 AA batteries
Safety information guide
Quick reference guide