Product overview: Fluke MDA-510 and MDA-550 Motor Drive Analyzers
Simplify complex motor-drive troubleshooting with guided test setups and automated drive measurements that provide reliable, repeatable test results.
The Fluke MDA 510 and MDA 550 Motor-Drive Analyzers save time and eliminate the hassle of setting up complex measurements, while simplifying the troubleshooting process for variable frequency drives. Simply select a test and the step-by-step guided measurements show you where to make voltage and current connections, while the preset measurement profiles ensure you will capture all the data you need for each critical motor-drive section from the input to the output, the DC bus, and the motor itself. From basic to advanced measurements, the MDA-500 Series has you covered, and with a built-in report generator you can quickly and easily generate as-found, and as-left reports with confidence.
The MDA-510 and MDA-550 are the ideal portable motor-drive analysis test tools and can help safely locate and troubleshoot typical problems on inverter type motor-drive systems.
Key features
- Guided testing with graphical step-by-step voltage and current connection diagrams makes setup and connection to variable frequency drives easier than ever
- Preset measurement profiles collect data based on the chosen test procedure and reduce the need for complex configuration
- Built-in report writing capabilities make it easy to produce professional as-found and as-left motor-drive troubleshooting reports
General Specifications:
Current (AMP) with current clamp
|
Ranges |
Same as V ac, Vac+dc or V peak |
|
Scale Factors |
0.1 mV/A, 1 mV/A, 10 mV/A, 20 mV/A,
50mV/A, 100 mV/A, 200 mV/A, 400 mV/A |
|
Accuracy |
Same as Vac, Vac+dc or V peak (add
current clamp accuracy) |
|
Frequency (Hz) |
|
|
Range |
1.000 Hz to 500 MHz |
|
Full scale reading |
999 counts |
|
Accuracy |
±(0.5 % + 2 counts) |
|
Voltage/Herz ratio (V/Hz) |
|
|
Purpose |
To show the measured V PWM value (see
V PWM) divided by the fundamental frequency on variable ac motor speed drives |
|
Accuracy |
% Vrms + % Hz |
|
Voltage unbalance drive input |
|
|
Purpose |
To show the highest percentage difference
of one of the phase vs average of the 3 true-rms voltages |
|
Accuracy |
Indicative percentage based on Vac+dc
values |
|
Voltage unbalance drive output and
motor input |
|
|
Purpose |
To show the highest percentage difference
of one of the phase vs average of the 3 PWM voltages |
|
Accuracy |
Indicative percentage based on V PWM
values |
|
Current unbalance drive input |
|
|
Purpose |
To show the highest percentage difference
of one of the phase vs average of the 3 AC current values |
|
Accuracy |
Indicative percentage based on Aac+dc
values |
|
Current unbalance drive output and
motor input |
|
|
Purpose |
To show the highest percentage
difference of one of the phase vs average of the 3 AC current values |
|
Accuracy |
Indicative percentage based on A ac
values |
|
Rise and fall time |
|
|
Readings |
Voltage difference (dV), time
difference (dt), voltage vs time difference (dV/dt), overshoot |
|
Accuracy |
As oscilloscope accuracy |
|
Harmonics and spectrum |
|
|
Harmonics |
DC to 51st |
|
Spectrum ranges |
1…9 kHz, 9-150 kHz (20 MHz filter
on), up to 500 MHz (voltage modulation) |
|
Shaft voltage |
|
|
Events / second |
Indicative percentage based on rise
and fall time (Impulse discharges) measurements |
|
Report data capture |
|
|
Number of screens |
Typical 50 screens can be saved in
reports (depends on compression ratio) |
|
Transfer to PC |
Using 2 GB USB stick or mini-USB to
USB cable and FlukeView™ 2 for ScopeMeter™ test tool |
|
Probe settings |
|
|
Voltage probe |
1:1, 10:1, 100:1, 1000:1, 20:1, 200:1 |
|
Current clamp |
0.1 mV/A, 1 mV/A, 10 mV/A, 20 mV/A,
50 mV/A, 100 mV/A, 200 mV/A, 400 mV/A |
|
Shaft voltage probe |
1:1, 10:1, 100:1 |
Models: Fluke MDA-510 and MDA-550 Motor Drive Analyzers
Fluke MDA-550Fluke MDA-550 Motor drive analyzer, 4 channel, 500 MHz with motor shaft and harmonicsIncludes: