Product overview: Fluke 438-II Power Quality Analyzer & Motor Analyzer
Quickly and easily discover electrical and mechanical performance of electric motors, and evaluate power quality with a single test tool
The Fluke 438-II Power Quality and Motor Analyzer adds key mechanical measurement capabilities for electric motors to the advanced power quality analysis functions of the Fluke 435 Series II Power Quality Analyzers. Quickly and easily measure and analyze key electrical and mechanical performance parameters such as power, harmonics, unbalance, motor speed, torque and mechanical power without the need of mechanical sensors. Fluke 434-II, 435-II and 437-II Power Quality Analyzer users can add motor analysis capabilities to their existing units with the Fluke-438-II/MA Motor Analyzer upgrade kit. The 438-II uses data from the motor rating plate for either NEMA or IEC rated motors to aid the calculation of the mechanical parameters.
Key features
- The 438-II Power Quality Analyzer & Motor Analyzer helps you effectively evaluate electrical and mechanical performance just by hooking up voltage and measuring current, providing you with an unprecedented level of data.
- Brings key motor analysis parameters like speed, torque and mechanical power and calculates motor efficiency without mechanical sensors
- Includes full power quality and electrical energy analyzer functionality
- Highest safety rating in industry; 1000 V CAT III / 600 V CAT IV
Specifications: Fluke 190-504 500MHz ScopeMeter® Test Tool
Specifications
|
Motor Type |
3 phase asynchronous (induction) |
|
Power Source |
Variable Frequency Drive |
|
Motor Frequency Range |
40Hz to 70Hz |
|
Over/Under Voltage from Nominal V/f
Curve (%) |
-15% to +15% |
|
Carrier Frequency Range |
2.5kHz–20kHz |
|
Variable speed drive technology that
is covered by the 438-II |
|
|
Inverter Type |
VSI only (voltage controlled) |
|
Control Method |
V/f control, open-loop vector, closed
loop vector, drives with encoders. |
|
Frequency |
40 to 70 Hz |
|
Variable speed drive technology NOT
covered by the 438-II |
|
|
Inverter Type |
CSI (current source inverter) |
|
Motors type |
Synchronous (DC, stepper, permanent
magnet etc.) |
|
Motor Frequency |
<40 and >70 Hz |
|
General Specifications |
|
|
Case |
Design Rugged, shock proof with
integrated protective holster Drip and dust proof IP51 according to IEC60529
when used in tilt stand position Shock and vibration Shock 30 g, vibration: 3
g sinusoid, random 0.03 g 2 /Hz according to MIL-PRF-28800F Class 2 |
|
Display |
Brightness: 200 cd/m 2 typ. using
power adapter, 90 cd/m 2 typical using battery power Size: 127 x 88 mm (153
mm/6.0 in diagonal) LCD Resolution: 320 x 240 pixels Contrast and brightness:
user-adjustable, temperature compensated |
|
Memory |
8GB SD card (SDHC compliant, FAT32
formatted), up to 32GB optionally. Screen save and multiple data memories for
storing data including recordings (dependent on memory size). |
|
Real-Time Clock |
Time and date stamp for Trend mode,
Transient display, System Monitor and event capture |
|
Environmental |
|
|
Operating Temperature |
0°C ~ +40°C; +40°C ~ +50°C excl.
battery |
|
Storage Temperature |
-20°C ~ +60°C |
|
Humidity |
+10°C ~ +30°C: 95% RH non-condensing |
|
|
+30°C ~ +40°C: 75% RH non-condensing |
|
|
+40°C ~ +50°C: 45% RH non-condensing |
|
Maximum Operating Altitude |
Up to 2,000 m (6666 ft) for CAT IV
600 V, CAT III 1000 V |
|
|
Up to 3,000 m (10,000 ft) for CAT III
600 V, CAT II 1000 V |
|
|
Maximum storage altitude 12 km
(40,000 ft) |
|
Electro-Magnetic-Compatibility (EMC) |
EN 61326 (2005-12) for emission and
immunity |
|
Interfaces |
Mini-USB-B, Isolated USB port for PC
connectivity SD card slot accessible behind instrument battery |
|
Warranty |
Three years (parts and labor) on main
instrument, one year on accessories |
Models: Fluke 438-II Power Quality Analyzer & Motor Analyzer
Includes:
- Test lead set
- i430 Thin flexible current probes (4)
- Battery
- Power adapter
- 8GB SD card
- Soft carry case
- CD Rom with PowerLog 430-II software and user documentation