In todays fast-paced workplace maximizing productivity is essential. Whether installing new fiber links or troubleshooting an existing network, the faster you can locate a problem, the faster you can fix it. Thats easier said than done when you are faced with a complex network of fibers, connectors and patch cords.
You can diagnose and repair simple fiber link problems with Fluke Networks VisiFaultTM Visual Fault Locator (VFL). The laser-powered VisiFault Visual Fault Locator is a cable continuity tester that locates fibers, verifies cable continuity and polarity. This cable continuity tester helps find breaks in cables, connectors and splices. Continuous and flashing modes make for easier identification. Compatible with 2.5mm and 1.25mm connectors for easy connection. Ruggedly constructed for demanding field-testing. This visual fault locator has a long battery life for hours of use.
VisiFault emits a bright beam of red light easily visible from a distance. Connect the VisiFault to one end of a fiber then locate that fiber at the other end, even if it one of many fibers either in a cable or terminated in a rack. Perform simple end-to-end continuity checks. Verify the proper polarity and orientation of fibers within a multi-fiber connector like the MT-RJ.
VisiFault can quickly illuminate fiber breaks, damaged connectors on patch cords, defective splices in splice trays, and tight fiber bends in and around equipment racks. The choice of a continuous wave output mode for steady fault illumination or a flashing output mode makes for easier fault location.
|
Optical |
|
|
Fiber compatibility |
Multimode and Singlemode |
|
Wavelength |
650 nm (visible wavelength) |
|
Laser safety rating |
Class II |
|
Output power |
< 1.3 mW |
|
Output modes |
Continuous (steady) and flashing
(2-3Hz pulsed) |
|
Range |
3 km multimode, 4 km singlemode |
|
Environmental and mechanical |
|
|
Operating temperature |
0 °C to 40 °C |
|
Storage temperature |
-20 °C to 60 °C |
|
Relative humidity |
95% (10 to 35 °C) |
|
Vibration |
Random, 2g, 5-500 Hz |
|
Shock |
1 m drop onto all corners and face |
|
Altitude |
3000 m |
|
General |
|
|
Dimensions |
157 x 52 x 37 mm (6.2 x 2.0 x 1.3
inch) |
|
Weight (including batteries) |
0.18 kg (5.7 oz) |
|
Adapter |
Tethered protective end cap |
|
Adapter cap |
Tethered protective end cap |
|
Controls |
On/off, continuous/flashing |
|
Battery type |
2 x AA |
|
Battery life |
> 80 hours in continuous mode |
|
Safety |
CSA C22.2 No. 1010.1 1992, EN
61010-1, CE |
|
Carrying Case |
Soft sided with belt loop |
Models
VisiFault Visual Fault Locator with 2.5mm universal adapter
