Sinetec Automation Pvt ltd|Complete Solutions in test Measurement,Calibration and Condition Monitoring

The Pro3000 Tone and Probe Series provides clear and precise tracing of communication cabling. The innovative filtered probe obstructs signal interference present in the environment (caused by power cables and lighting) when listening for tone. The probes powerful speaker makes tracing cables through drywall, wood or other enclosures quick and easy.

The Pro3000 toners patented SmartTone technology (with five different tones for exact pair identification) allows the technician to identify individual pairs. The tone generator is also capable of sending tone up to 10 miles (16 kilometers) on most cables! The angled-bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. Attach the nylon pouch to your belt, and you will be equipped for any wire identification job.

Pro3000 Capability

Use the SmartTone capability of the Pro3000 Analog Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification.

Tone Generator features:

SmartTone technology
Send tone signal up to 10 miles on most cables
Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs
Continuity testing
Line polarity confirmation

Pro3000 Analog Toner Specifications
User interface	Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED
Solid Frequency	1000 Hz nominal
Alternating Frequency	1000/1500 Hz nominal
Over Voltage Protection	60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode	8 dbm into 600 ohms
Output Voltage Level in Continuity Mode	8 Vdc with fresh battery
Battery	9V alkaline
Temperature	Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions	2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
Pro3000 Analog Probe Specifications
User interface	ON/OFF push button Volume dial Replaceable tip 3.5 mm earphone jack
Battery	9V alkaline
Temperature	Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions	9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)

Pro3000 Analog Tone & Probe Kit

Pro3000 Analog Probe
Pro3000F Filtered Probe (60 Hz) and Tone Generator
Pro3000F Filtered Probe (60 Hz)
Pro3000F Filtered Probe (50 Hz) and Tone Generator. (Only available internationally and not in the USA)
Pro3000F Filtered Probe (50 Hz). (Only available internationally and not in the USA)
Pro3000 Analog Probe replacement tip (two per bag)

Data sheet

https://www.sinetecautomation.com/backend/product_file/794580.pdf

User manual

https://www.sinetecautomation.com/backend/product_file/639606.pdf