Fluke Networks Fiber Optic Cleaning Kits contain the best fiber optic cleaning tools and products to effectively remove the toughest contaminants in any optical fiber cable (OFC) network. With a variety of kit options available, you can choose between the easy-to-use Quick Clean™ Cleaners, the convenient cleaning cube/card, and the best optic solvent pen to clean both patch cords and fiber end faces inside ports. Each of the eight fiber optic cleaning kits include products and materials that are lint-free and enable an optimal wet or dry cleaning process.
These customized solvents are more effective than the old isopropyl alcohol (IPA) method used to clean fiber end faces. These new solvents are more effective than IPA at dissolving many contaminants found on optical fiber cables, especially non-ionic compounds like bugger gel and pulling lube.
Clean OFC End Faces with the Quick Clean 1.25mm or 2.5mm Cleaner:
To begin end face fiber optic cable cleaning, open or remove the guide cap from the Quick Clean Cleaner.
Push the cleaner straight into the connector and you will a hear a click to confirm cleaning.
Clean OFC End Faces with the Quick Clean MPO Cleaner:
Open or remove the guide cap from the Quick Clean Cleaner.
Push the cleaner straight into the connector.
The Quick Clean is a one click fiber cleaner – just turn the dial until you hear a click to confirm cleaning.
The Fluke Networks Quick Clean MPO end face fiber cleaner
Inspect every end-face first. If it is clean, then it can be inserted as is. Most likely, it has accumulated some form of contamination and needs to be cleaned right before insertion:
Cleaning patch cords with a fiber optic Cleaning Card:
Remove the plastic cover from one cleaning zone.
Apply a minimal spot of solvent to the starting corner of the cleaning zone.
Holding the connector perpendicularly, swipe the end-face from the wet spot into a dry zone.
Inspect again to ensure a complete cleaning. If necessary, expose a new cleaning zone and repeat steps again.
Specifications |
|
Quick Clean 1.25mm |
Contents: Each unit cleans a minimum
of 500 end faces |
Quick Clean 2.5mm |
Contents: Each unit cleans a minimum
of 500 end faces |
Quick Clean MPO |
Contents: Each unit cleans a minimum
of 600 end faces |
Cleaning Card |
Contents: 12 cleaning zones |
Cleaning Cube |
Contents: 125 wipes – each cleans up
to 4 end-faces |
Solvent Pen |
Contents: 9 grams of fiber optic
solvent |
Swabs – 2.5mm |
Contents: 50 swabs |
Swabs – 1.25mm |
Contents: 25 swabs |
Models
FI-525
NFC-Kit-Case
NFC-Kit-Box
NFC-Kit-Case-E
Accessories
FT525-Case
NFC-Cards-5pack
NFC-SolventPen
NFC-Cube
NFC-Swabs-1.25mm
NFC-Swabs-2.5mm
NFC-Case
QuickClean-1.25-5P
QuickClean-2.5-5P
QuickClean-1.25-1P
QuickClean-2.5-1P
QC-MPO-12/24-1P
QC-MPO-12/24-5P
QC-MPO-16/32-1P
QC-MPO-16/32-5P