VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks. They are not very helpful for cable runs more than a few meters, or when the cable not visible or accessible, or when the laser light can’t penetrate the jacket.
Optical Time Domain Reflectometers (OTDR) provides graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time to and skill to operate.
Fiber QuickMap fills the gap between a VFL and an OTDR. These models have the simplicity of a VFL, and provide distance and power information on high losses, breaks, and the end of the fiber. They also identify live fiber
Features:
Operating temperature with the
battery |
0ºC to 50ºC |
Non-operating temperature |
-20ºC to 60ºC |
Operating relative humidity (without
condensation) |
Operating relative humidity (without
condensation) |
Vibration |
Random, 5 Hz to 500 Hz, MIL-PRF-28800F CLASS 2 |
Shock |
1 meter drop test |
Altitude |
3000m |
EMC |
EN 61326-1: 2004 |
Battery type |
2 AA alkaline batteries (no battery charger) |
Battery life |
1500 tests (typical) |
Laser safety |
Class 1 CDRH Complies to EN 60825-2 |
LCD type |
Backlit black and white (segments) |
Index of refraction range |
1.45 to 1.5 (factory default is 1.496) |
Auto turn off |
Automatically turns off after 5 minutes if no
keys are pressed. Backlight turns off first. |
Factory calibration interval |
None |
Output wavelengths |
Output wavelengths |
Laser safety |
Class 1 CDRH Complies to EN 60825-2 |
LCD type |
Backlit black and white (segments) |
Index of refraction range |
1.45 to 1.5 (factory default is 1.496) |
Auto turn off |
Automatically turns off after 5 minutes if no
keys are pressed. Backlight turns off first. |
Factory calibration interval |
None |
Output wavelengths |
850 nm ± 10 nm |
Laser classification |
Class 1 CDRH Complies to EN 60825-2 |
Dynamic range |
Maximum number of incidents shown |
Maximum distance |
>11 dB |
Maximum number of incidents shown |
9 |
Bulkhead quality |
If no fiber is attached or if the connector is
dirty, the troubleshooter displays 0 m or 0 ft. |
Live fiber detection |
Detects optical signals from 600 nm to 1050 nm
and shows ACTIVE LINE if a signal is there. Looks for a signal every 3
seconds after the first detec-tion. +7 dB maximum input power. |
Certifications and compliance |
Conforms to relevant European Union |
|
directives Conforms to relevant Australian
standardsc |
|
Listed by the Canadian Standards Association
CSAC22.2 No. 61010.1.04 Conforms to FCC Rules, Part A, Class A |
Models:
FQM- Includes multimode fiber fault locator unit, screw on interchangeable SC adapter, 4-language Quick Reference Guide (manuals in 9 languages available on-line), safety instruction manual, and batteries.
FQM-100-M- Includes multimode fiber fault locator unit, screw on interchangeable SC adapter, 50 µm SC/LC Multimode Launch Fiber, carrying case, 4-language Quick Reference Guide (manuals in 9 languages available on-line), safety instruction manual, and batteries
FQM-100-M-VFL- FQM-100-M
GLD-FQM-100-M