Reduced to the max
The R&S NGE100B DC Power supply series consists of robust, high-performance, affordable instruments. They offer high efficiency combined with low ripple plus a variety of comfort functions that are not usually found in this class of power supplies.
Key facts
R&S NGE102B with two or R&S NGE103B with three channels
Max. output power of 66 W with R&S NGE102B, 100 W with R&S NGE103B
Max. output voltage of 32 V per channel
Electronic fuse (OCP), overvoltage (OVP)/ overpower (OPP)/ overtemperature protection (OTP)
USB interface (VCP/TMC), optional LAN (LXI), optional wireless LAN, optional digital I/O (4bit)
|
Specification |
|
|
Electrical specifications |
|
|
Number of output channels |
2/3 |
|
Total output power |
max. 66 W/100 W |
|
Maximum output power per channel |
33,6 W |
|
Output voltage per channel |
0 V to 32 V |
|
Maximum output current per channel |
03:00 AM |
|
Voltage ripple and noise (20 Hz to 20
MHz) |
typ. < 1.5 mV (RMS) |
|
|
< 20 mV (peak-to-peak) (meas.) |
|
Current ripple and noise (20 Hz to 20
MHz) |
< 2 mA (RMS) (meas.) |
|
Load recovery time (10 % to 90 %
load change within a band of ± 20 mV of set voltage) |
< 200 µs (meas.) |
|
Programming/readback resolution
voltage |
10 mV |
|
Programming/readback resolution
current |
1 mA |
|
Output measurements |
|
|
Readback resolution voltage |
10 mV |
|
Readback resolution current |
1 mA |
|
Readback accuracy voltage ±(% of
output + offset) |
< 0.1 % + 20 mV |
|
Readback accuracy current ±(% of
output + offset) |
< 0.1 % + 5 mA |
|
Special functions |
|
|
Measurement functions |
voltage, current, power, energy |
|
Protection functions |
OVP, OCP, OPP, OTP |
|
FuseLink function |
● |
|
Fuse delay at output-on |
● |
|
Sense function |
- |
|
Sink mode |
- |
|
Output sequencing |
- |
|
Trigger input/output |
- |
|
Arbitrary function |
● (EasyArb) |
|
Analog/modulation interface |
- |
|
Data logging |
- |
|
Display and interfaces |
|
|
Display |
3,5
QVGA |
|
Rear panel connections |
- |
|
Remote control interfaces: standard |
USB |
|
Remote control interfaces: optional |
LAN, WLAN |
|
General data |
|
|
Dimensions (W × H × D) |
222 mm × 97 mm × 310 mm |
|
Weight |
4.9 kg/5.0 kg |
|
Rack installation |
R&S HZC95 option |
|
Available Models |
|
|
|
|
|
Models |
Number of output channels |
Max. output power |
Output voltage per channel |
Output current per channel |
|
R&S®NGE102B |
2 |
66 W |
0 V to 32 V |
0 A to 3 A |
|
R&S®NGE103B |
3 |
100 W |
0 V to 32 V |
0 A to 3 A |