Up to four channels in a single instrument
The R&S HMP DC Power supplies are primarily designed for industrial use. With three or four output channels and up to 10 A output current per channel, these rugged instruments are ideal for a wide variety of applications. They offer high efficiency with low residual ripple and many protection functions.
Key facts
3 or 4 channels with max. 384 W total output power
Maximum output current per channel: 10 A
Maximum output power per channel: 160 W
Maximum output voltage of 32 V per channel; higher voltages possible in serial operation
Electronic fuse (OCP), overvoltage protection (OVP), overtemperature protection (OTP)
|
Electrical specifications: |
|
|
Number of output channels |
3/4 |
|
Total output power |
max. 384 W |
|
Maximum output power per channel |
160 W |
|
Output voltage per channel |
0 V to 32 V |
|
Maximum output current per channel |
10:00 AM |
|
Voltage ripple and noise (20 Hz
to 20 MHz) |
< 1.5 mV (RMS) (meas.) |
|
Current ripple and noise (20 Hz
to 20 MHz) |
< 1 mA (RMS) (meas.) |
|
Load recovery time (10 % to 90 %
load change within a band of ± 20 mV of set voltage) |
< 1 ms (meas.) |
|
Programming resolution voltage |
1 mV |
|
Programming resolution current |
< 1 A: 0.2 mA |
|
Output measurements |
|
|
Readback resolution voltage |
1 mV |
|
Readback resolution current |
< 1 A: 0.2 mA, ≥ 1 A: 1 mA |
|
Readback accuracy voltage ± (% of
output + offset) |
< 0.05 % + 5 mV |
|
Readback accuracy current ±(% of
output + offset) |
< 0.1 % + 2 mA |
|
Special functions |
|
|
Measurement functions |
voltage, current |
|
Protection functions |
OVP, OCP, OTP |
|
FuseLink function |
● |
|
Fuse delay at output-on |
● |
|
Sense function |
● |
|
Sink mode |
- |
|
Output sequencing |
- |
|
Trigger input/output |
- |
|
Arbitrary function |
● (EasyArb) |
|
Analog/modulation interface |
- |
|
Data logging |
- |
|
Display and interfaces |
|
|
Display |
240 × 128 pixel LCD |
|
Rear panel connections |
connector block with 4 lines per
channel |
|
Remote control interfaces: standard |
USB, LAN |
|
Remote control interfaces: optional |
IEEE-488 (GPIB), RS-232 |
|
General data |
|
|
Dimensions (W × H × D) |
285 mm × 136 mm × 405 mm |
|
Weight |
12.4 kg/12.8 kg |
|
Rack installation |
R&S®HZP91 option |
|
Available models |
||||
|
Models |
Number
of output channels |
Max. output power |
Output voltage per channel |
Output current per channel |
|
R&S®HMP4030 |
3 |
384 W |
0 V to 32 V |
10A |
|
R&S®HMP4040 |
4 |
384 W |
0 V to 32 V |
10A |