Repeatability and high accuracy
The Fluke 802EN Vibration Meter reaches the highest standards in terms of repeatability and test accuracy in the industry, which is certified by Certified Management Consultant (CMC).
Easy to use with one button switching vibration unit
Make go or no-go predictive maintenance decisions with confidence. The Fluke 802EN Vibration Meter allows you to easily assess the state of in-service equipment and determine whether maintenance is required. With only one button you can switch between displacement, velocity, and acceleration measurements.
Different accessories to meet various needs
The Fluke 802EN Vibration Meter comes with optional accessories to help measure under different industry conditions. The meter also supports an extension rod, external sensor, M12 RF connector spring cable assembly, and earphones for various applications.
Key features:
Three test modes to meet complex test environment in industrial field
High repeatability to ensure accuracy of continuous testing
One-button measurement to get assessment result in 6 seconds
99 sets of data storage, review in real-time
|
Internal Piezoelectric Accelerometer |
|||
|
Sensitivity (typical) |
10.00
mV / m/s² ± 5% (1 g = 9.8 m/s²) |
||
|
Measurement |
|||
|
Acceleration |
Range |
0.1 m/s² to 199.9 m/s² peak
(rms √2) |
|
|
Resolution |
0.1 m/s² |
||
|
Accuracy |
± (5 % + 2 dgt) (LO: 10 Hz to 1
kHz) |
||
|
± (10 % + 5 dgt) (HI: 1 kHz to
10 kHz) |
|||
|
Velocity |
Range |
0.1 mm/s to 199.9 mm/s rms |
|
|
Resolution |
0.1 mm/s |
||
|
Accuracy |
± (5% + 2 dgt) (10 Hz to 1 kHz) |
||
|
Displacement |
Range |
0.001
mm to 1.999 mm peak-peak (rms 2√2) |
|
|
|
Resolution |
0.001 mm |
|
|
|
Accuracy |
± (5 % +2 dgt) (10 Hz to 1 kHz) |
|
|
Piezoelectrical Accelerometer |
|||
|
Typical frequency response |
10 Hz to 15 kHz |
||
|
Amplitude Units |
|||
|
Acceleration |
g, m/s² |
||
|
Velocity |
mm/s |
||
|
Displacement |
mm |
||
|
External Piezoelectrical Accelerometer |
|||
|
DC bias voltage |
6 V dc to 7 V dc |
||
|
DC bias current |
3.5 mA |
||
|
Note: Other specifications are
the same as those of the internal piezoelectric accelerometers |
|||
|
Battery |
2 AAA, IEC LR03 |
||
|
Battery life |
25 hrs for measurement |
||
|
Dimensions (L x W x H) |
24.1 x 7.1 x 5.8 cm |
||
|
|
|||